0:000:00
Unitree G1 football
Shared by eG1 Olympic Standing Long Jump
Policy + simulator
0:000:00
G1 Olympic Standing Long JumpAbout this project
Explore this builder’s robotics project. Watch the result and check the project files for implementation details.
- Environment
- Not specified
- Robot
- Unitree G1
- Includes
- Policy + simulator
FROM SIM TO REAL
Safety & real-world tests
01 · SubmissionFormat checked
Archive and policy files
02 · SimulationNeeds changes
Automated G1 safety checks
03 · Real robotNo approval recorded
Runner video and data appear here
Robot package missing
No runner container found. Include submission.tar, or g1-runner.json with a public archive URL and SHA-256 for a large image. A model ZIP and run.sh alone cannot start in the G1 runner. setup.sh stays on the robot.
Container simulation and hardware qualification are separate. Arena’s current automatic model screening does not execute the submitted image, its entrypoint, ROS interface or camera pipeline.
Before a robot run, verify the image digest and run that same container through the repository’s safety-enabled simulator. Retain the reports and traces. Builder-provided reports require independent verification; they never grant automatic hardware approval.
Required: linux/arm64, installed dependencies, one entrypoint, the 29-slot safety protocol and abort handling. Camera/lidar are not standard inputs; base state needs qualification. setup.sh belongs on the robot.
Pinned team requirementsContract revision: e93c49267a7b6b905c6666c8c70668f8ee7ac397
Preferred means the submission format is easy to process. It says nothing about safety.
This automated check records simulation findings. Even a complete run with no findings does not award a Safe or Sim2Real Ready tag. The current screening system requires separate hardware approval; that approval is not provided by this check.
Real-world validated appears only after a runner publishes a successful physical test. It describes that test, not a guarantee for future runs.
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Needs changes
2 scenarios crossed an enforced limit. Review the screening report.
0 tests without findings · 2 tests with findings · 0 evaluation errors · 0 unavailable or unreported scenarios
Provisional screening profile. Tests with findings need review; evaluation errors need investigation. Neither counts as a pass.
Loading builder feedback…
Scripted G1 long jump with the submitted phase parameters and landing feedback. Two scenarios: the submitted simulator updates at 500 Hz, while its deployment configuration declares 100 Hz. Both timings are tested and labeled separately using the same HIM team checks. Original primitive robot geometry is preserved. No trained-policy, perturbation or hardware-readiness claim.
Release: g1-screening-pr10-e93c492-v3
Evaluator revision: e93c49267a7b6b905c6666c8c70668f8ee7ac397
Policy SHA-256: 09036baeacac050a66029c1de73915ada56c7cc3d97633f4394e08a43f74af09
Submission format
Policy type unknown
Include an ONNX policy model for the Preferred submission standard.
- Include an ONNX policy model for the Preferred submission standard.
- Policy type is unknown. Add arena-policy.json with policy_type: scripted or trained.
- Other formats can still be submitted. Preferred only describes the initial submission standard.
Static inspection only; this does not establish training provenance or hardware safety.
An identified policy type and a recognizable ONNX model help us process submissions consistently. Preferred does not mean Sim2Real Ready. Other formats are welcome.
For the clearest result, include an ONNX model and an arena-policy.json file beside it:
{"policy_type":"trained","model":"policy.onnx"}Use scripted for hand-authored behavior. The model path is relative to this file. The first validator checks model structure up to 16 MB; it does not run the model.
Validator: arena-validator-v2-g1-container · 2026-10-13T17:00:29.966Z
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Needs changes
2 scenarios crossed an enforced limit. Review the screening report.
0 tests without findings · 2 tests with findings · 0 evaluation errors · 0 unavailable or unreported scenarios
Provisional screening profile. Tests with findings need review; evaluation errors need investigation. Neither counts as a pass.
Scripted G1 long jump with the submitted phase parameters and landing feedback. Two scenarios: the submitted simulator updates at 500 Hz, while its deployment configuration declares 100 Hz. Both timings are tested and labeled separately using the same HIM team checks. Original primitive robot geometry is preserved. No trained-policy, perturbation or hardware-readiness claim.
Release: g1-screening-pr10-e93c492-v2
Evaluator revision: e93c49267a7b6b905c6666c8c70668f8ee7ac397
Policy SHA-256: 09036baeacac050a66029c1de73915ada56c7cc3d97633f4394e08a43f74af09
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Needs changes
2 scenarios crossed an enforced limit. Review the screening report.
0 tests without findings · 2 tests with findings · 0 evaluation errors · 0 unavailable or unreported scenarios
Provisional screening profile. Tests with findings need review; evaluation errors need investigation. Neither counts as a pass.
Scripted G1 long jump with the submitted phase parameters and landing feedback. Two scenarios: the submitted simulator updates at 500 Hz, while its deployment configuration declares 100 Hz. Both timings are tested and labeled separately using the same HIM team checks. Original primitive robot geometry is preserved. No trained-policy, perturbation or hardware-readiness claim.
Release: g1-screening-pr10-e93c492-v1
Evaluator revision: e93c49267a7b6b905c6666c8c70668f8ee7ac397
Policy SHA-256: 09036baeacac050a66029c1de73915ada56c7cc3d97633f4394e08a43f74af09
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Needs changes
2 scenarios crossed an enforced limit. Review the screening report.
0 tests without findings · 2 tests with findings · 0 evaluation errors · 0 unavailable or unreported scenarios
Provisional screening profile. Tests with findings need review; evaluation errors need investigation. Neither counts as a pass.
Scripted G1 long jump with the submitted phase parameters and landing feedback. Two scenarios: the submitted simulator updates at 500 Hz, while its deployment configuration declares 100 Hz. Both timings are tested and labeled separately using the same HIM team checks. Original primitive robot geometry is preserved. No trained-policy, perturbation or hardware-readiness claim.
Release: g1-screening-pr6-47cd947-v4
Evaluator revision: 47cd9479d5dda1598e12ec94649e6e7bc1468d63
Policy SHA-256: 09036baeacac050a66029c1de73915ada56c7cc3d97633f4394e08a43f74af09
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Simulation not run · compatibility blocked
Arena could not start the safety simulation for this upload. No safety result was established. Follow the preparation steps below.
Original diagnostic: Safety tests have not run. Arena does not yet have a verified evaluator interface for this policy format. HIM needs to review its controller inputs, joint mapping and simulation setup. This is not a safety failure or a request to add a missing adapter file.
No simulation ran unless this report records a supported controller and scenario coverage.
Release: g1-screening-pr6-47cd947-v2
Evaluator revision: 47cd9479d5dda1598e12ec94649e6e7bc1468d63
Policy SHA-256: 09036baeacac050a66029c1de73915ada56c7cc3d97633f4394e08a43f74af09
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Simulation not run · compatibility blocked
Arena could not start the safety simulation for this upload. No safety result was established. Follow the preparation steps below.
Original diagnostic: This policy needs a supported safety adapter. Declare safety_adapter: g1-walker-99-v1 only when its observation/action semantics match that contract.
Neural controller only; scripted behavior is not screened.
Release: g1-screening-pr6-47cd947-v1
Evaluator revision: 47cd9479d5dda1598e12ec94649e6e7bc1468d63
Policy SHA-256: 09036baeacac050a66029c1de73915ada56c7cc3d97633f4394e08a43f74af09
No real-world test recorded in Arena yet. Video, results, and run data will appear here.
Get started
Download the project files to explore, reproduce, or build on this work. Inspect the builder’s code before running it in your environment.
him_g1_standing_long_jump_source.zip · SHA-256 09036baeacac050a66029c1de73915ada56c7cc3d97633f4394e08a43f74af09What’s included
Policy + simulator · Result video · Project ZIP
Builder-provided run command
./run.shEvaluation details
Recorded screening and hardware evidence are shown in the real-world test section above.
Limitations
This project is shared by its builder. Simulation results do not establish real-world safety. Review the source, dependencies, licensing, and hardware requirements before use.
Files & contents
him_g1_standing_long_jump_source.zip · 0.0 MB
SHA-256 09036baeacac050a66029c1de73915ada56c7cc3d97633f4394e08a43f74af09
seed_final_jump.mp4 · MP4