0:000:00
Unitree G1 football
Shared by banksythequantLabParkour Clear v2 — Unitree G1 Scripted MuJoCo
Policy + simulator
0:000:00
Parkour Clear v2 — Unitree G1 Scripted MuJoCoAbout this project
Scripted assisted-base parkour v2; 30–40cm step + narrow beam; HUD slow-mo; simulated contact; not trained or hardware-ready. Causality pass.
- Environment
- MuJoCo
- Robot
- Unitree G1
- Includes
- Policy + simulator
FROM SIM TO REAL
Safety & real-world tests
01 · SubmissionFormat checked
Archive and policy files
02 · SimulationSimulation not run
Prepare a compatible export below
03 · Real robotNo approval recorded
Runner video and data appear here
Robot package missing
No runner container found. Include submission.tar, or g1-runner.json with a public archive URL and SHA-256 for a large image. A model ZIP and run.sh alone cannot start in the G1 runner. setup.sh stays on the robot.
Container simulation and hardware qualification are separate. Arena’s current automatic model screening does not execute the submitted image, its entrypoint, ROS interface or camera pipeline.
Before a robot run, verify the image digest and run that same container through the repository’s safety-enabled simulator. Retain the reports and traces. Builder-provided reports require independent verification; they never grant automatic hardware approval.
Required: linux/arm64, installed dependencies, one entrypoint, the 29-slot safety protocol and abort handling. Camera/lidar are not standard inputs; base state needs qualification. setup.sh belongs on the robot.
Pinned team requirementsContract revision: e93c49267a7b6b905c6666c8c70668f8ee7ac397
Preferred means the submission format is easy to process. It says nothing about safety.
This automated check records simulation findings. Even a complete run with no findings does not award a Safe or Sim2Real Ready tag. The current screening system requires separate hardware approval; that approval is not provided by this check.
Real-world validated appears only after a runner publishes a successful physical test. It describes that test, not a guarantee for future runs.
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Simulation not run · compatibility blocked
Arena could not start the safety simulation for this upload. No safety result was established. Follow the preparation steps below.
Loading builder feedback…
Original diagnostic: This scripted parkour demo uses artificial base-position assistance. Its robot balance is not produced by the joint controller alone. Builder: provide a free-base controller and simulator without prescribed pelvis motion for a transferable G1 test. HIM: any assisted-demo screening must be labeled as assisted and cannot establish balance or hardware readiness. ONNX conversion cannot remove this limitation.
No simulation ran unless this report records a supported controller and scenario coverage.
Release: g1-screening-pr10-e93c492-v3
Evaluator revision: e93c49267a7b6b905c6666c8c70668f8ee7ac397
Policy SHA-256: e4b53f4156f53d873ddd2353252550f85d8053140413dfee2dcd7ce402a082b8
Submission format
Policy type unknown
Include an ONNX policy model for the Preferred submission standard.
- Include an ONNX policy model for the Preferred submission standard.
- Policy type is unknown. Add arena-policy.json with policy_type: scripted or trained.
- Other formats can still be submitted. Preferred only describes the initial submission standard.
Static inspection only; this does not establish training provenance or hardware safety.
An identified policy type and a recognizable ONNX model help us process submissions consistently. Preferred does not mean Sim2Real Ready. Other formats are welcome.
For the clearest result, include an ONNX model and an arena-policy.json file beside it:
{"policy_type":"trained","model":"policy.onnx"}Use scripted for hand-authored behavior. The model path is relative to this file. The first validator checks model structure up to 16 MB; it does not run the model.
Validator: arena-validator-v2-g1-container · 2026-10-13T16:59:11.862Z
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Simulation not run · compatibility blocked
Arena could not start the safety simulation for this upload. No safety result was established. Follow the preparation steps below.
Original diagnostic: This scripted parkour demo uses artificial base-position assistance. Its robot balance is not produced by the joint controller alone. Builder: provide a free-base controller and simulator without prescribed pelvis motion for a transferable G1 test. HIM: any assisted-demo screening must be labeled as assisted and cannot establish balance or hardware readiness. ONNX conversion cannot remove this limitation.
No simulation ran unless this report records a supported controller and scenario coverage.
Release: g1-screening-pr10-e93c492-v2
Evaluator revision: e93c49267a7b6b905c6666c8c70668f8ee7ac397
Policy SHA-256: e4b53f4156f53d873ddd2353252550f85d8053140413dfee2dcd7ce402a082b8
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Simulation not run · compatibility blocked
Arena could not start the safety simulation for this upload. No safety result was established. Follow the preparation steps below.
Original diagnostic: This scripted parkour demo uses artificial base-position assistance. Its robot balance is not produced by the joint controller alone. Builder: provide a free-base controller and simulator without prescribed pelvis motion for a transferable G1 test. HIM: any assisted-demo screening must be labeled as assisted and cannot establish balance or hardware readiness. ONNX conversion cannot remove this limitation.
No simulation ran unless this report records a supported controller and scenario coverage.
Release: g1-screening-pr10-e93c492-v1
Evaluator revision: e93c49267a7b6b905c6666c8c70668f8ee7ac397
Policy SHA-256: e4b53f4156f53d873ddd2353252550f85d8053140413dfee2dcd7ce402a082b8
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Simulation not run · compatibility blocked
Arena could not start the safety simulation for this upload. No safety result was established. Follow the preparation steps below.
Original diagnostic: This scripted parkour demo uses artificial base-position assistance. Its robot balance is not produced by the joint controller alone. Builder: provide a free-base controller and simulator without prescribed pelvis motion for a transferable G1 test. HIM: any assisted-demo screening must be labeled as assisted and cannot establish balance or hardware readiness. ONNX conversion cannot remove this limitation.
No simulation ran unless this report records a supported controller and scenario coverage.
Release: g1-screening-pr6-47cd947-v4
Evaluator revision: 47cd9479d5dda1598e12ec94649e6e7bc1468d63
Policy SHA-256: e4b53f4156f53d873ddd2353252550f85d8053140413dfee2dcd7ce402a082b8
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Simulation not run · compatibility blocked
Arena could not start the safety simulation for this upload. No safety result was established. Follow the preparation steps below.
Original diagnostic: Safety tests have not run. Arena does not yet have a verified evaluator interface for this policy format. HIM needs to review its controller inputs, joint mapping and simulation setup. This is not a safety failure or a request to add a missing adapter file.
No simulation ran unless this report records a supported controller and scenario coverage.
Release: g1-screening-pr6-47cd947-v2
Evaluator revision: 47cd9479d5dda1598e12ec94649e6e7bc1468d63
Policy SHA-256: e4b53f4156f53d873ddd2353252550f85d8053140413dfee2dcd7ce402a082b8
Safety check
Model screening only. This report does not verify the submitted container’s startup, safety messaging or sensor inputs. See the G1 runner package requirements above.
Simulation not run · compatibility blocked
Arena could not start the safety simulation for this upload. No safety result was established. Follow the preparation steps below.
Original diagnostic: This policy needs a supported safety adapter. Declare safety_adapter: g1-walker-99-v1 only when its observation/action semantics match that contract.
Neural controller only; scripted behavior is not screened.
Release: g1-screening-pr6-47cd947-v1
Evaluator revision: 47cd9479d5dda1598e12ec94649e6e7bc1468d63
Policy SHA-256: e4b53f4156f53d873ddd2353252550f85d8053140413dfee2dcd7ce402a082b8
No real-world test recorded in Arena yet. Video, results, and run data will appear here.
Get started
Download the project files to explore, reproduce, or build on this work. Inspect the builder’s code before running it in your environment.
submission.zip · SHA-256 e4b53f4156f53d873ddd2353252550f85d8053140413dfee2dcd7ce402a082b8What’s included
Policy + simulator · Result video · Project ZIP
Builder-provided run command
./run.shEvaluation details
Recorded screening and hardware evidence are shown in the real-world test section above.
Limitations
This project is shared by its builder. Simulation results do not establish real-world safety. Review the source, dependencies, licensing, and hardware requirements before use.
Files & contents
submission.zip · 25.4 MB
SHA-256 e4b53f4156f53d873ddd2353252550f85d8053140413dfee2dcd7ce402a082b8
result.mp4 · MP4